Use this procedure to configure, edit, or delete a Bridge VLAN profile.
-
Choose from the following actions:
- If you are in the process of configuring a new Profile, go to then proceed to the next step.
-
If you want to edit or delete a Bridge VLAN profile, go to Profiles
<select a
device profile> .
Choose from the following actions:
- To edit a Bridge VLAN profile, select
adjacent to the target profile. Modify
the profile in accordance with the steps in this procedure.
- To delete a Bridge VLAN profile, select
adjacent to the target profile.
-
Select
to create a new Bridge VLAN profile.
-
Enter a numerical value (1 -
4094) in the VLAN field, then select Add.
-
Configure the parameters in the
General, IGMP Snooping,
and MLD
Snooping tabs.
-
Select Add to create the
new Bridge VLAN profile.
-
After you have completed
configuring the settings, choose from the following actions:
-
Select Revert to restore default settings or restore the
last saved settings.

Note
You cannot
restore default settings after applying or saving
changes.
-
Select Apply
to commit the configured settings.

Note
This does not
permanently save the settings you configured. If you perform a
Reload (warm reboot), applied settings will be lost.
-
Select Save
to commit and save the configured settings.

Note
If you do not select Apply or
Save, the settings that you configured are
not saved when you move away from the configuration
window.